Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Subaru >> 2017 >> Outback 2.5i >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 2 (Fuel Injection System (H6DO)) >> Mass Air Flow and Intake Air Temperature Sensor >> Installation

Mass Air Flow and Intake Air Temperature Sensor: Installation

WARNING: This page is about a different variant/trim than selected.
  1. Install the mass air flow and intake air temperature sensor, and connect the connector to the mass air flow and intake air temperature sensor.

    Tightening torque: 

    1 N.m (0.1 kgf-m, 0.7 ft-lb) 

  2. Connect the ground terminal to battery sensor. <Ref. to BATTERY , NOTE, Repair Contents.>
scientia non olet · About Mike's Workshop Manuals