Inspection Mode 1
| DTC | Item | Note |
|---|---|---|
| U0073 | CONTROL MODULE COMMUNICATION BUS OFF | - |
| U0101 | LOST COMMUNICATION WITH TCM | - |
| U0122 | LOST COMMUNICATION WITH VEHICLE DYNAMICS CONTROL MODULE | - |
| U0140 | LOST COMMUNICATION WITH BODY CONTROL MODULE | - |
| U0155 | LOST COMMUNICATION WITH INSTRUMENT PANEL CLUSTER (IPC) CONTROL MODULE | - |
| U0402 | INVALID DATA RECEIVED FROM TCM | - |
| U0416 | INVALID DATA RECEIVED FROM VEHICLE DYNAMICS CONTROL MODULE | - |
| U0422 | INVALID DATA RECEIVED FROM BODY CONTROL MODULE | - |
| U0423 | INVALID DATA RECEIVED FROM INSTRUMENT PANEL CLUSTER CONTROL MODULE | - |
| B2304 | REAR RADAR ON-OFF SWITCH STUCK | - |
| B2311 | REAR RADAR DETECT TCM | - |
| B2313 | REAR RADAR DETECT VDC | - |
| B2327 | REAR RADAR INTERNAL FAILURE (INTERNAL ELECTRIC CIRCUIT) | - |
| B2350 | REAR RADAR COMMUNICATION ERROR BETWEEN MASTER AND SLAVE | - |
- Perform the Clear Memory Mode. Ref. to CLEAR MEMORY MODE
- Read the DTC and check that the DTC is not displayed. Ref. to
READ DIAGNOSTIC TROUBLE CODE (DTC) NOTE: If the DTC is displayed on the screen, the trouble is still present. Perform the diagnosis for the displayed DTCs. After solving the DTC, repeat from step 1
- Start the engine and wait for 30 seconds or more.
- Read the DTC and check that the DTC is not displayed. Ref. to READ DIAGNOSTIC TROUBLE CODE (DTC)
NOTE:
If the DTC is displayed on the screen, the trouble is still present. Perform the diagnosis for the displayed DTCs. Ref. to
LIST OF DIAGNOSTIC TROUBLE CODE (DTC)