Auto Headlight Beam Leveler Control Module: Removal

1. Disconnect the ground terminal from battery sensor. <Ref. to BATTERY , NOTE, Repair Contents.>
2. Remove the cover assembly - instrument panel LWR driver. <Ref. to REMOVAL , Instrument Panel Lower Cover.>
3. Remove the bolts, and then remove the panel - knee guard.
   Fig 1: Locating Panel - Knee Guard Bolts

   Courtesy of SUBARU OF AMERICA, INC.
4. Release the lock and remove the relay holder.
   Fig 2: Relay Holder And Lock

   Courtesy of SUBARU OF AMERICA, INC.
5. Remove the auto headlight beam leveler Control Module.
   1. Remove the nut.
   2. Disconnect the connector and remove the auto headlight beam leveler Control Module.

Fig 3: Locating Auto Headlight Beam Leveler Control Module Nut And Connector

Courtesy of SUBARU OF AMERICA, INC.