Malfunction Indicator Light Does Not Come On: Trouble symptom

When the ignition switch is turned to ON (engine OFF), malfunction indicator light does not illuminate.

Fig 1: Warning Light Illumination Pattern Diagnosis Flowchart (Malfunction Indicator Light ON)

Courtesy of SUBARU OF AMERICA, INC.

1. CHECK DTC  .

Read the DTC of LAN system using the Subaru Select Monitor or a general scan tool. Ref. to LAN SYSTEM (DIAGNOSTICS)>Diagnostic Trouble Code (DTC) .

Is DTC for LAN system displayed?

Yes: Check the appropriate DTC using the "Diagnostic Trouble Code (DTC)". Ref. to LAN SYSTEM (DIAGNOSTICS)>Diagnostic Trouble Code (DTC)>LIST .

No: Replace the meter case assembly of combination meter. Ref. to INSTRUMENTATION/DRIVER INFO>Combination Meter .