Ignition/Acc Change Function Check
- Check push button ignition switch function
- Check the power supply change control through push button ignition switch, brake pedal, clutch pedal operation, and shift position.
- CVT model
Shift lever position Brake pedal operation Push button ignition switch operation P Released Repeat Ignition switch OFF → ACC ON → Ignition switch ON → Ignition switch OFF P Released Switch engine running → Ignition switch OFF P Depressed Ignition switch OFF → Engine started P Depressed ACC ON → Engine started P Depressed Ignition switch ON → Engine started P Depressed Engine running → Ignition switch OFF N Released Repeat Ignition switch OFF → ACC ON → Ignition switch ON → ACC ON N Released Engine running → ACC ON N Depressed Ignition switch OFF → Engine started N Depressed ACC ON → Engine started N Depressed Ignition switch ON → Engine started N Depressed Engine running → ACC ON Other than P or N Released Repeat Ignition switch OFF → ACC ON → Ignition switch ON → ACC ON Other than P or N Released Engine running → ACC ON Other than P or N Depressed Ignition switch OFF → Ignition switch ON Other than P or N Depressed ACC ON → Ignition switch ON Other than P or N Depressed Engine running → ACC ON - MT model
Shift lever position Clutch pedal operation Push button ignition switch operation - Released Repeat Ignition switch OFF → ACC ON → Ignition switch ON → Ignition switch OFF Released Engine running → Ignition switch OFF Depressed Ignition switch OFF → Engine started Depressed ACC ON → Engine started Depressed Ignition switch ON → Engine started Depressed Engine running → Ignition switch OFF - Check power status display
- Check the power indicator display of the push button ignition switch.NOTE: *1: Key collation is normal, and the stop light switch (CVT) or clutch switch (MT) is ON.
*2: For CVT models, while the select lever button is being pressed, the indicator does not illuminate in green even if the select lever is in P range.
- Check the power indicator display of the push button ignition switch.
POWER INDICATOR DISPLAY REFERENCE
| Push button ignition switch status | Indicator lighting status |
|---|---|
| Ignition switch OFF (except for condition *1) | Light OFF |
| ACC ON (except for condition *1) | Orange light |
| Ignition switch ON (except for condition *1) | Orange light |
| Engine start standby (*1) | Green light (*2) |
| After engine is started | Light OFF |
NOTE:
The indicator blinks if any of the following malfunctions are detected.
| Detected malfunction | Indicator lighting status |
|---|---|
| Steering lock stuck | Green blinking |
| Clutch switch failure | Orange blinking |
| Steering lock control module internal malfunction | Orange blinking |
| Keyless access control module internal malfunction | Orange blinking |
| Vehicle speed signal malfunction | Orange blinking |