Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Subaru >> 2017 >> BRZ Limited, Automatic Trans >> Repair and Diagnosis >> General Information >> Reset Procedures >> Tire Pressure Monitor Systems >> TPMS Reset Procedures >> Tire Pressure Sensor Registration >> Confirmation Of Transmitter ID Registration

Confirmation Of Transmitter ID Registration

NOTE: It takes several minutes in order to update the tire pressure data. If the data is not displayed, perform troubleshooting according to the procedures from diagnostic code C2121 to C2124.
  1. Enter the following menus: [Each System Check] / [Tire pressure monitor] / [Current Data Display & Save].
  2. Read the "Tire Pressure" values.
  3. Confirm that the tire pressure data of all 4 tires is displayed on the SSM3 screen.
  4. If normal pressure values are displayed, the IDs are registered correctly.
scientia non olet · About Mike's Workshop Manuals