Power window regulator master switch ASSY: Removal

1. Disconnection of the battery ground terminal (Refer to Working precautions and notes )
2. Removal of the door armrest cover LH (Refer to Assembly )
3. Removal of the front door trim board SUB-ASSY LH (Refer to Assembly )
4. Removal of power window regulator master switch ASSY W/front armrest base panel UPR LH (driver's side door) (Refer to Assembly )
5. Removal of power window regulator master switch ASSY
   1. Using a flat head screw driver wrapped in protective tape, release the 4 tabs and remove the power window regulator master switch ASSY from the front armrest base panel UPR LH.

Fig 1: Removing Power Window Regulator Master Switch Assy From Front Armrest Base Panel UPR LH

Courtesy of SUBARU OF AMERICA, INC.