Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Subaru >> 2016 >> WRX STI >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 6 (Starting System & Charging System (WRX)) >> Generator >> Removal

Section 6 (Starting System & Charging System (WRX)): Generator: Removal

WARNING: This page is about a different variant/trim than selected.
  1. Remove the collector cover. < Ref. to REMOVAL , Collector Cover. >
  2. Disconnect the ground terminal from battery sensor. < Ref. to BATTERY , NOTE, Note. >
  3. Remove the brake booster vacuum pump. < Ref. to REMOVAL , Brake Vacuum Pump. >
  4. Remove the V-belts. < Ref. to V-BELT , REMOVAL, V-belt. >
  5. Remove the collector cover bracket.
    Fig 1: Locating Collector Cover Bracket Bolts
    G10267432Courtesy of SUBARU OF AMERICA, INC.
  6. Disconnect the connector (A) and terminal (B) from the generator.
    Fig 2: Identifying Connector And Terminal Of Generator
    G09476732Courtesy of SUBARU OF AMERICA, INC.
  7. Remove the generator from the generator bracket.
    Fig 3: Locating Generator Bolts
    G09476733Courtesy of SUBARU OF AMERICA, INC.
  8. Remove the V-belt tensioner. < Ref. to V-BELT TENSIONER ASSEMBLY , REMOVAL, V-belt. >
  9. Remove the generator bracket from the engine.
    Fig 4: Locating Generator Bracket Bolts
    G09476734Courtesy of SUBARU OF AMERICA, INC.
scientia non olet · About Mike's Workshop Manuals