Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Subaru >> 2016 >> Outback 3.6R Limited >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 12 (Engine Controls (H4DO) (Diagnostics - Introduction)) >> Diagnostics for Engine Starting Failure >> Procedure

Diagnostics for Engine Starting Failure: Procedure

WARNING: This page is about a different variant/trim than selected.
  1. Check of the fuel amount

  2. Inspection of starter motor circuit < Ref. to STARTER MOTOR CIRCUIT , Diagnostics for Engine Starting Failure. >

  3. Inspection of ECM power supply and ground line < Ref. to CHECK POWER SUPPLY AND GROUND LINE OF ENGINE CONTROL MODULE (ECM) , Diagnostics for Engine Starting Failure. >

  4. Inspection of ignition control system < Ref. to IGNITION CONTROL SYSTEM , Diagnostics for Engine Starting Failure. >

  5. Inspection of fuel pump circuit < Ref. to FUEL PUMP CIRCUIT , Diagnostics for Engine Starting Failure. >

  6. Inspection of fuel injector circuit < Ref. to FUEL INJECTOR CIRCUIT , Diagnostics for Engine Starting Failure. >