Execution Condition
| Secondary Parameters | Execution condition |
|---|---|
| Battery voltage | ≥10.9 V |
| Sub feedback | In operation |
| Amount of intake air | ≥10g/s (0.35oz/s) |
| Estimated temperature of the rear oxygen sensor element | ≥500°C (932°F) |
| Enable conditions at interrupt control are as follows Air fuel ratio reduced from target air fuel ratio |
= Value of Map |
| Continuous time when rear oxygen sensor output voltage is less than 0.55V | ≥5000ms(CVT model) ≥15000ms(MT model) |
Map
MAP SPECIFICATION
| Output voltage of rear oxygen sensor V | 0.000 V | 0.150 V | 0.200 V | 0.400 V | 0.600 V |
|---|---|---|---|---|---|
| Air fuel ratio reduced from target air fuel ratio % | 0.150 V x 100 | 0.150 V x 100 | 0.400 V x 100 | 0.400 V x 100 | 0.400 V x 100 |