Wastegate Control Solenoid Valve: Removal

1. Disconnect the ground cable from battery.
2. Remove the intake duct No. 2. Ref. to INTAKE (INDUCTION) (H4DOTC) > Intake Duct >  INTAKE DUCT NO. 2  .
3. Disconnect the connector (A) and vacuum hose (B) from the wastegate control solenoid valve.
4. Remove the wastegate control solenoid valve from the intake duct No. 1.

Fig 1: Identifying Connector And Vacuum Hose Of Wastegate Control Solenoid Valve

Courtesy of SUBARU OF AMERICA, INC.