DTC B1576 EGI Control Module EEPROM: DTC Detecting Condition
WARNING: This page is about a different car, the 2015 Subaru XV Crosstrek and 2015 Subaru Impreza. However, it is still accessible from the selected car via links, so may be relevant.
- ECM malfunctioning
- When inaccessible to ROM in ECM during registration.
| Step | Check | Yes | No |
|---|---|---|---|
| 1 PERFORM ECM REGISTRATION
. Perform ECM registration. Refer to the "REGISTRATION MANUAL FOR IMMOBILIZER". |
Is ECM registration complete? | Make sure that the engine can start. This completes the work. | Go to step 2 . |
| 2 PERFORM ECM REGISTRATION
. Perform ECM registration. Refer to the "REGISTRATION MANUAL FOR IMMOBILIZER". |
Is ECM registration complete? | Make sure that the engine can start. This completes the work. | Go to step 3 . |
| 3 PERFORM ECM REGISTRATION
. Perform ECM registration. Refer to the "REGISTRATION MANUAL FOR IMMOBILIZER". |
Is ECM registration complete? | Make sure that the engine can start. This completes the work. | Replace the ECM. < Ref. to REMOVAL (Except Hybrid) , Engine Control Module (ECM). > < Ref. to REMOVAL (Hybrid) , Engine Control Module (ECM). > |