Intake Air Flow Meter S/A (FA20): Installation
WARNING: This page is about a different car, the 2014 Subaru BRZ. However, it is still accessible from the selected car via links, so may be relevant.
- Installation of intake air flow meter sub-assembly
- Using 2 screws, install the intake air flow meter sub-assembly.
Standard value: T=1.0N.m {10kgf.cm} {0.7ft.lbf}
- Connect the connector for intake air flow meter sub-assembly.
- Using 2 screws, install the intake air flow meter sub-assembly.
- Connection of the battery ground terminal
Standard value: T=6.0N.m {61kgf.cm} {4.4ft.lbf}