Accelerator Pedal Rod Assembly (FA20): Installation
WARNING: This page is about a different car, the 2014 Subaru BRZ. However, it is still accessible from the selected car via links, so may be relevant.
- Installation of accelerator pedal sensor assembly
- Using 2 nuts, install the accelerator pedal sensor assembly.
Standard value: T=7.5N.m {77kgf.cm} {5.5ft.lbf}
- Connect the connector for accelerator pedal sensor assembly.
- Using 2 nuts, install the accelerator pedal sensor assembly.
- Connection of the battery ground terminal
Standard value: T=6.0N.m {61kgf.cm} {4.4ft.lbf}