Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Subaru >> 2016 >> BRZ Limited, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 58 (Occupant Detection System (Diagnostics)) >> Occupant Detection System >> Preparation Tool

Occupant Detection System: Preparation Tool

WARNING: This page is about a different car, the 2014 Subaru BRZ. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION: When measuring the voltage, resistance, etc. of the airbag system components, be sure to use the specified test harness.
  1. Subaru Select Monitor
    Shape Tool number Remarks
    G07910019
    		 1B022XU0 Used for diagnosing electrical system failure.
  2. Test harness Y
    Tool number Remarks
    98299AG040 Used for diagnosis of the seat belt buckle switch.
    Fig 1: Identifying Test Harness Y Circuit
    G08557656Courtesy of SUBARU OF AMERICA, INC.
  3. Test harness AE
    Tool number Remarks
    98299XA030 The adapter harness for the test harness Y. Used for diagnosis of the seat belt buckle switch.
    Fig 2: Identifying Test Harness AE Circuit
    G08557657Courtesy of SUBARU OF AMERICA, INC.
  4. Test harness AS
    Tool number Remarks
    98299CA010 Used when measuring voltage and resistance of the occupant detection system.
    Fig 3: Identifying Test Harness AS Circuit
    G08557658Courtesy of SUBARU OF AMERICA, INC.
scientia non olet · About Mike's Workshop Manuals