Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Subaru >> 2016 >> BRZ Limited, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 58 (Occupant Detection System (Diagnostics)) >> Occupant Detection System >> Communication For The Airbag System Initialization Is Not Possible

Communication For The Airbag System Initialization Is Not Possible

WARNING: This page is about a different car, the 2014 Subaru BRZ. However, it is still accessible from the selected car via links, so may be relevant.

Perform inspection when communication between the airbag control module and the Subaru Select Monitor is not possible.

Detecting conditions

Harness connector is faulty.

Trouble symptoms

Communication between the airbag control module and the Subaru Select Monitor is not possible.

Inspection steps

Refer to "Communication for initializing is not possible" of SRS airbag system. (Refer to SUBARU SELECT MONITOR )

scientia non olet · About Mike's Workshop Manuals