Steering Wheel: Inspection
Check the resistance of paddle switch.
Courtesy of SUBARU OF AMERICA, INC.
| Step |
Check |
Yes |
No |
1 SHIFT-UP SWITCH CONTINUITY CHECK.
- Operate the + side of paddle shift assembly and hold it.
- Measure the resistance between terminals of the paddle shift assembly connector.
Terminals
Gasoline engine model
No. 1 - No. 3:
HEV model
No. 4 - No. 3:
|
Is the resistance less than 10 Ω? |
Go to step 2
. |
Replace the paddle shift assembly. |
2 SHIFT-DOWN SWITCH CONTINUITY CHECK.
- Operate the - side of paddle shift assembly and hold it.
- Measure the resistance between terminals of the paddle shift assembly connector.
Terminals
No. 1 - No. 4:
|
Is the resistance less than 10 Ω? |
Go to step 3
. |
Replace the paddle shift assembly. |
3 CHECK SHIFT SWITCH INSULATION.
- Do not operate the paddle shift assembly.
- Measure the resistance between terminals of the paddle shift assembly connector.
Terminals
Gasoline engine model
No. 1 - No. 3:
No. 1 - No. 4:
HEV model
No. 4 - No. 3:
No. 1 - No. 4:
|
Is the resistance 1 MΩ or more? |
Paddle shift assembly is normal. |
Replace the paddle shift assembly. |
Replace the paddle switch if the inspection result is not within the standard value.