Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Subaru >> 2015 >> WRX STI >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 8 (Fuel Injection System (Except STI)) >> Oil Control Solenoid >> Inspection

Oil Control Solenoid: Inspection

WARNING: This page is about a different variant/trim than selected.
  1. Check that the oil control solenoid has no deformation, cracks or other damages.
  2. Measure the resistance between the oil control solenoid terminals.
    Fig 1: Measuring Resistance Between Oil Control Solenoid Terminals
    G08315385Courtesy of SUBARU OF AMERICA, INC.
    Terminal No. Standard
    1 and 2 7.25±0.4 Ω (when 20°C (68°F))
scientia non olet · About Mike's Workshop Manuals