Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Subaru >> 2015 >> WRX STI >> Repair and Diagnosis >> External Pages >> Different car >> Section 73 (Vehicle Dynamics Control (VDC) System (Service Information)) >> VDC Control Module and Hydraulic Control Unit (VDCCM&H/U) >> Maintenance Mode >> VDCCM Parameter Reading

VDCCM Parameter Reading

WARNING: This page is about a different car, the 2015 Subaru Outback and 2015 Subaru Legacy. However, it is still accessible from the selected car via links, so may be relevant.
  1. Connect the Subaru Select Monitor.
  2. On «Main Menu» display, select «Each System Check».
  3. On «System Selection Menu» display, select «Brake Control System».
  4. On «Brake Control System» display, select «ABS/VDC System».
  5. When «VDC/parking brake» is displayed, select the [OK] button.
  6. On «Brake Control Diagnosis» display, select «Work Support».
  7. On «Work Support» display, select «Maintenance at the time of ECM replacement».
  8. Select «Reading of parameter: ECM to SSM».
  9. Save and close the file.
scientia non olet · About Mike's Workshop Manuals