Solenoid Unit
- Remove the AT select lever. <Ref. to
REMOVAL , Select Lever.>
- Remove the spacer and gasket. <Ref. to
DISASSEMBLY , Select Lever.>
- Using a flat tip screwdriver with a thin tip, remove the harness connector.
Courtesy of SUBARU OF AMERICA, INC.
- Raise the claw with a flat tip screwdriver with a thin tip and remove the solenoid unit.
Courtesy of SUBARU OF AMERICA, INC.
- Remove the terminal of the solenoid unit using a flat tip precision screwdriver with a tip width of 1.3 mm (0.05 in) or less, KTC connector terminal tool ECC-1T or equivalent.
Courtesy of SUBARU OF AMERICA, INC.