Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Subaru >> 2015 >> WRX Base >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 14 (Continuously Variable Transaxle (CVT)) >> Reduction Driven Gear >> Adjustment

Reduction Driven Gear: Adjustment

WARNING: This page is about a different variant/trim than selected.
  1. Measure clearance "A" between snap ring and transmission case.

    Specification: 

    0.05 - 0.25 mm (0.002 - 0.01 in) 

    Fig 1: Measuring Clearance Between Snap Ring And Transmission Case
    G09482181Courtesy of SUBARU OF AMERICA, INC.
  2. If clearance "A" is out of standard, select the snap ring within standard.
    Snap ring
    Part No. Thickness mm (in)
    805100460 2.0 (0.079)
    805100461 2.1 (0.083)
    805100462 2.2 (0.087)
    805100463 2.3 (0.091)
    805100464 2.4 (0.094)
scientia non olet · About Mike's Workshop Manuals