Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Subaru >> 2015 >> WRX Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 99 (Engine Intake System (Induction) (H4DO)) >> Air Intake Boot >> Removal

Air Intake Boot: Removal

WARNING: This page is about a different car, the 2015 Subaru Outback and 2015 Subaru Legacy. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the clip (A) from the air intake boot.
  2. Loosen the clamp (B) securing the air cleaner case (rear) to the air intake boot.
  3. Loosen the clamp (C) which secures the throttle body to the air intake boot.
    Fig 1: Identifying Air Intake Boot Clamp And Clip
    G10262107Courtesy of SUBARU OF AMERICA, INC.
  4. Disconnect the PCV hose and remove the air intake boot.
scientia non olet · About Mike's Workshop Manuals