Inspection Mode 4
WARNING: This page is about a different car, the 2015 Subaru Outback and 2015 Subaru Legacy. However, it is still accessible from the selected car via links, so may be relevant.
| DTC | Item | Note |
|---|---|---|
| B2282 | Vehicle Speed Signal Abnormal | - |
| B2283 | Vehicle Speed Sensor Fault Detection | - |
Diagnostic procedure:
- Prepare for the inspection mode. <Ref. to PREPARATION FOR THE INSPECTION MODE , PROCEDURE, Inspection Mode.>
- Drive for 20 seconds or more at a vehicle speed of 25 km/h (15.5 MPH) or more.
- Read the DTC and check that the DTC is not displayed.NOTE: If the DTC is displayed on the screen, the trouble is still present. Perform the diagnosis according to DTC.