Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Subaru >> 2015 >> WRX Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 89 (Security And Locks - Keyless Access (W/Push Button Start) (Diagnostics)) >> Diagnostic Procedure with Diagnostic Trouble Code (DTC) >> DTC B1576 EGI Control Module EEPROM >> Trouble Symptom

DTC B1576 EGI Control Module EEPROM: Trouble Symptom

WARNING: This page is about a different car, the 2015 Subaru Outback and 2015 Subaru Legacy. However, it is still accessible from the selected car via links, so may be relevant.

Engine will not start.

CAUTION: For replacement procedure of ECM, refer to the "REGISTRATION MANUAL FOR IMMOBILIZER".
DIAGNOSTICS PROCEDURE

Step Check Yes No
1 PERFORM ECM REGISTRATION. 
Perform ECM registration. Refer to the "REGISTRATION MANUAL FOR IMMOBILIZER".		 Is ECM registration complete? Make sure that the engine can start. This completes the work. Go to step 2  .
2 PERFORM ECM REGISTRATION. 
Perform ECM registration. Refer to the "REGISTRATION MANUAL FOR IMMOBILIZER".		 Is ECM registration complete? Make sure that the engine can start. This completes the work. Go to step 3  .
3 PERFORM ECM REGISTRATION. 
Perform ECM registration. Refer to the "REGISTRATION MANUAL FOR IMMOBILIZER".		 Is ECM registration complete? Make sure that the engine can start. This completes the work. Replace the ECM. <Ref. to REMOVAL , Engine Control Module (ECM).> <Ref. to REMOVAL , Engine Control Module (ECM).>
scientia non olet · About Mike's Workshop Manuals