Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Subaru >> 2015 >> WRX Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 89 (Security And Locks - Keyless Access (W/Push Button Start) (Diagnostics)) >> Clear Memory Mode >> Operation

Clear Memory Mode: Operation

WARNING: This page is about a different car, the 2015 Subaru Outback and 2015 Subaru Legacy. However, it is still accessible from the selected car via links, so may be relevant.
  1. On «Main Menu» display, select «Each System Check».
  2. On «System Selection Menu» display, select «Keyless access system».
  3. On «Keyless access system» display, select «Clear Memory».
    NOTE:
    • For detailed operation procedures, refer to "PC application help for Subaru Select Monitor".
    • Initial diagnosis of electronic throttle control is performed after memory clearance. Wait for 10 seconds or more after turning the ignition switch to ON, and then start the engine.
scientia non olet · About Mike's Workshop Manuals