Switch Assembly
WARNING: This page is about a different car, the 2015 Subaru Outback and 2015 Subaru Legacy. However, it is still accessible from the selected car via links, so may be relevant.
Using a circuit tester (set to "ohm"), check that there is continuity between terminals S and M, and between terminal S and ground. Also check to be sure there is no continuity between terminal M and B.
RESISTANCE REFERENCE
| Terminals | Standard |
|---|---|
| S - M | 1 Ω or less |
| S - Ground | 1 Ω or less |
| M - B | 1 MΩ or more |