Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Subaru >> 2015 >> WRX Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 82 (Starting System & Charging System (H4DO)) >> Generator >> Removal

Section 82 (Starting System & Charging System (H4DO)): Generator: Removal

WARNING: This page is about a different car, the 2015 Subaru Outback and 2015 Subaru Legacy. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the ground terminal from battery sensor. <Ref. to BATTERY , NOTE, Repair Contents.>
  2. Remove the V-belts. <Ref. to REMOVAL , V-belt.>
  3. Disconnect the connector (A) and terminal (B) from the generator, and remove the clip (C).
    Fig 1: Identifying Generator Connector And Terminal
    G10263147Courtesy of SUBARU OF AMERICA, INC.
  4. Remove the V-belt cover bracket.
    Fig 2: Locating V-Belt Cover Bracket Bolts
    G10263148Courtesy of SUBARU OF AMERICA, INC.
  5. Remove the generator from the generator bracket.
    Fig 3: Locating Generator Bracket Bolts
    G10263149Courtesy of SUBARU OF AMERICA, INC.
  6. Remove the V-belt tensioner. <Ref. to V-BELT TENSIONER ASSEMBLY , REMOVAL, V-belt.>
  7. Remove the generator bracket from the engine.
    Fig 4: Locating Engine Generator Bracket Bolts
    G10263150Courtesy of SUBARU OF AMERICA, INC.
scientia non olet · About Mike's Workshop Manuals