General Tool

WARNING: This page is about a different car, the 2015 Subaru Outback and 2015 Subaru Legacy. However, it is still accessible from the selected car via links, so may be relevant.

TOOL NAME	REMARKS
Alignment gauge	Used for measuring wheel alignment.
Alignment gauge adapter	Used for measuring wheel alignment.
Turning radius gauge	Used for measuring wheel alignment.
Toe-in gauge	Used for toe-in measurement.
Chain sling	Used for hanging power unit. Diameter: 6 mm (0.24 in) or 6.3 mm (0.25 in) Length: 0.8 - 1 m (2.6 - 3.3 ft) Chain inner width: 8.5 mm (0.33 in) or more Chain external width: 23.5 mm (0.93 in) or less Load capacity: 1.2 t (2646 lb) or more
Shackle	Two units used for hanging power unit. Attached to both end of chain sling and connected to engine hook. Load capacity: 250 kg (551 lb) or more
Sling belt	Used to remove and install the cradle. Width: 35 - 40 mm (1.38 - 1.57 in) Length: 2 m (6.6 ft) Load capacity: 1 t (2205 lb) or more
Shackle	Used to remove and install the cradle. Load capacity: 500 kg (1103 lb) or more
Tie-rod ball joint puller	Used for disconnecting tie-rod end.
Dial gauge	Used for damper strut measurement.
Coil spring compressor	Used for disassembling and assembling strut assembly and shock absorber assembly.