Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Subaru >> 2015 >> WRX Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 71 (Power Steering System (Service Information)) >> Steering Wheel >> Inspection >> Paddle Shift Switch

Paddle Shift Switch

WARNING: This page is about a different car, the 2015 Subaru Outback and 2015 Subaru Legacy. However, it is still accessible from the selected car via links, so may be relevant.
  1. Measure the resistance between connector terminals.

    Preparation tool: 

    Circuit tester 

    Fig 1: Measuring Resistance Between Paddle Shift Switch Connector Terminals
    G10272458Courtesy of SUBARU OF AMERICA, INC.
    Terminal No. Inspection conditions Standard
    3 - 4 Operate the + side of paddle shift assembly and hold it. Less than 10 Ω
    1 - 4 Operate the - side of paddle shift assembly and hold it. Less than 10 Ω
    1 - 4
    3 - 4    		 Do not operate the paddle shift assembly. Is the resistance 1 MΩ or more?
  2. Replace the paddle shift switch if the inspection result is not within the standard value.
scientia non olet · About Mike's Workshop Manuals