Section 7 (Starting System & Charging System (WRX-STI)): Generator: Removal
WARNING: This page is about a different car, the 2013 Subaru Impreza. However, it is still accessible from the selected car via links, so may be relevant.
- Disconnect the ground cable from battery.
- Remove the V-belt covers.
- Disconnect the connector and terminal from generator.
- Remove the front side belts. < Refer to FRONT SIDE BELT , REMOVAL, V-belt. > < Refer to FRONT SIDE BELT , REMOVAL, V-belt. >
- Remove the bolts which install the generator onto bracket.