Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Subaru >> 2015 >> WRX Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 69 (Seat System - Seats -- Legacy/Outback) >> Power Seat System >> Removal >> Power Seat Control Module (Seat With Memory Function)

Power Seat Control Module (Seat With Memory Function)

WARNING: This page is about a different car, the 2015 Subaru Outback and 2015 Subaru Legacy. However, it is still accessible from the selected car via links, so may be relevant.
  1. Raise the seat cushion by operating the switch.
  2. Remove the front seat from the vehicle.
  3. Remove the power seat control module.
    1. Release the hooks on seat front and turn over the cushion cover.
    2. Remove the nuts, and remove the power seat control module.
      Fig 1: Locating Nuts And Power Seat Control Module
      G08584891Courtesy of SUBARU OF AMERICA, INC.
scientia non olet · About Mike's Workshop Manuals