Audio system

WARNING: This page is about a different car, the 2015 Subaru Outback and 2015 Subaru Legacy. However, it is still accessible from the selected car via links, so may be relevant.

CAUTION: For models with 7 inch display, refer to "NAVIGATION SYSTEM ".

Prepare the target point. <Ref. to INSPECTION , Rearview Camera System.>
Turn the ignition switch to ACC.
(a) Press the button to display the Audio OFF screen.
Touch the screen in order from (b) to (e).

Fig 1: Pressing Button To Display Audio OFF Screen
Courtesy of SUBARU OF AMERICA, INC.

NOTE: Pressing the button (a) or turning the ignition switch from the OFF to ACC position can exit the diagnostic mode.
{Line Diag} screen is displayed.
Touch {Camera Setting} on the {Line Diag} screen.

Fig 2: Display - Camera Setting On Line Diag Screen
Courtesy of SUBARU OF AMERICA, INC.
The display will switch to the rear camera marker selection mode screen.
Touch the adjustment keys on the display screen to adjust the marker line.

Fig 3: Display - Switch To Rear Camera Marker Selection Mode Screen
Courtesy of SUBARU OF AMERICA, INC.
Touch {Set} to store the marker line setting information.
NOTE: When {Return} is touched, the setting is not stored and the display switches to the {Line Diag} screen.
After the setting is completed, confirm that the marker line position is correctly adjusted.