Check Of Welcome Lighting System (Welcome Light Remains On)

WARNING: This page is about a different car, the 2015 Subaru Outback and 2015 Subaru Legacy. However, it is still accessible from the selected car via links, so may be relevant.

DIAGNOSTICS PROCEDURE

Step	Check	Yes	No
1 CHECK BODY INTEGRATED UNIT SETTING . Display the data of «Welcome Light Off Delay Time(Approaching)» or «Welcome Light Off Delay Time(Exiting)» using the Subaru Select Monitor. NOTE: For detailed procedures, refer to "PC application help for Subaru Select Monitor".	Is the illumination time setting correct?	Go to step 2 .	Set the illumination time.
2 CHECK THE LIGHTS . Set the lighting switch to the switch 1 (TAIL) and switch 2 (HEAD).	Do the parking light, tail light and headlight illuminate?	Go to step 3 .	Check the combination switch (light) and each light circuit.
3 CHECK BODY INTEGRATED UNIT . Using the Subaru Select Monitor, display the data of «Driver's door SW input».	Does the display switch between OFF ←→ ON when driver's door is opened/closed?	Go to step 4 .	Check the door switch. <Ref. to CHECK DOOR SWITCH , INSPECTION, Keyless Entry System.>
4 CHECK DOOR LOCK . Operate the door lock using the keyless transmitter or the access key.	Do the lock and unlock operate properly?	Replace the body integrated unit. <Ref. to BODY INTEGRATED UNIT .>	Check keyless entry system. <Ref. to INSPECTION , Keyless Entry System.> Check the keyless access with push button start system. <Ref. to BASIC DIAGNOSTIC PROCEDURE .>