Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Subaru >> 2015 >> WRX Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 57 (Anti-Theft System - Security And Locks) >> Body Integrated Unit >> Note >> When Replacing The Body Integrated Unit

When Replacing The Body Integrated Unit

WARNING: This page is about a different car, the 2015 Subaru Outback and 2015 Subaru Legacy. However, it is still accessible from the selected car via links, so may be relevant.
  1. Check and record the current setting. <Ref. to CONFIRM CURRENT SETTING , OPERATION, Registration Body Integrated Unit.>
    CAUTION:
    • When the body integrated unit is replaced, registration of the immobilizer is required.

      For detailed operation procedure, refer to the "REGISTRATION MANUAL FOR IMMOBILIZER". (Models without the keyless access with push button start)

    • When replacing the body integrated unit, install the starter relay (a) to the relay holder.
    Fig 1: Identifying Starter Relay
    G10272971Courtesy of SUBARU OF AMERICA, INC.
    NOTE: The fuse & relay box is a single unit with the body integrated unit.
scientia non olet · About Mike's Workshop Manuals