Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Subaru >> 2015 >> WRX Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 44 (Lighting System (WRX)) >> Front Fog Light Assembly >> Adjustment >> Fog Light Aiming

Fog Light Aiming

WARNING: This page is about a different car, the 2013 Subaru Impreza. However, it is still accessible from the selected car via links, so may be relevant.
  1. Before checking the fog light beam level, be sure of the following:
    • The area around the fog light has not sustained any accident, damage or other type of deformation.
    • Vehicle is parked on a level surface.
    • The inflation pressure of tires is correct.
    • Vehicle's fuel tank is fully filled.
  2. Bounce the vehicle several times to normalize the suspension.
  3. Make certain that someone is seated in the driver's seat.
  4. Remove the clips and turn over the mud guard.
    Fig 1: Turning Over Mud Guard
    G08543045Courtesy of SUBARU OF AMERICA, INC.
  5. Adjust the front fog light pattern by inserting a Phillips screwdriver to the adjusting hole (1).
    Fig 2: Locating Adjusting Hole
    G08543046Courtesy of SUBARU OF AMERICA, INC.
    Fig 3: Identifying Distance Between Low Beam Bulb Centers And Height Of Fog Light Center
    G08543047Courtesy of SUBARU OF AMERICA, INC.
    h mm (in) at 3 m (10 ft)
    60 (2.38)