Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Subaru >> 2015 >> WRX Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 34 (Speed Control System (WRX-STI)) >> Accelerator Pedal >> Inspection >> Check Accelerator Pedal Sensor Area (Method With SUBARU Select Monitor)

Check Accelerator Pedal Sensor Area (Method With SUBARU Select Monitor)

WARNING: This page is about a different car, the 2013 Subaru Impreza. However, it is still accessible from the selected car via links, so may be relevant.
  1. Turn the ignition switch to ON. (engine OFF)
  2. Read the accelerator pedal opening angle signal and voltage of accelerator pedal sensor using Subaru Select Monitor. < Refer to READ CURRENT DATA FOR ENGINE (NORMAL MODE) OPERATION, Subaru Select Monitor. >
Accelerator pedal sensor Accelerator pedal opening angle signal Standard
Main 0.0% 0.4 - 1.0 V
100.0% 2.4 - 3.7 V
Sub 0.0% 0.3 - 1.1 V
100.0% 2.3 - 3.8 V
scientia non olet · About Mike's Workshop Manuals