Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Subaru >> 2015 >> WRX Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 186 (Security And Locks - Keyless Access (W/Push Button Start) (Diagnostics)) >> Inspection Mode >> Procedure >> Inspection Mode 2

Inspection Mode 2

WARNING: This page is about a different car, the 2016 Subaru Outback and 2016 Subaru Legacy. However, it is still accessible from the selected car via links, so may be relevant.
DTC Item Note
B2779 REMOTE CONTROL ENGINE STARTER COLLATION -

Diagnostic procedure:

  1. Prepare for the inspection mode. < Ref. to PREPARATION FOR THE INSPECTION MODE , PROCEDURE, Inspection Mode. >
  2. Register the remote engine starter, and operate it.
  3. Read the DTC and check that the DTC is not displayed. < Ref. to READ DIAGNOSTIC TROUBLE CODE (DTC) . >
    NOTE: If the DTC is displayed on the screen, the trouble is still present. Perform the diagnosis according to DTC.
scientia non olet · About Mike's Workshop Manuals