Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Subaru >> 2015 >> WRX Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 160 (Blind Spot Detection System (Diagnostics)) >> Inspection Mode >> Operation >> Inspection Mode 2

Inspection Mode 2

WARNING: This page is about a different car, the 2016 Subaru Outback and 2016 Subaru Legacy. However, it is still accessible from the selected car via links, so may be relevant.
DTC Item Note
B2300 REAR RADAR CIRCUIT LOW -
B2301 REAR RADAR CIRCUIT HIGH -
  1. Perform the Clear Memory Mode. < Ref. to CLEAR MEMORY MODE . >
  2. Read the DTC and check that the DTC is not displayed. < Ref. to READ DIAGNOSTIC TROUBLE CODE (DTC) . >
    NOTE: If the DTC is displayed on the screen, the trouble is still present. Perform the diagnosis according to DTC. After solving the DTC, repeat from step  1).
  3. Start the engine.
  4. Perform the System Operation Check Mode «Door mirror indicator active test». < Ref. to SYSTEM OPERATION CHECK MODE . >
  5. Read the DTC and check that the DTC is not displayed. < Ref. to READ DIAGNOSTIC TROUBLE CODE (DTC) . >
    NOTE: If the DTC is displayed on the screen, the trouble is still present. Perform the diagnosis according to DTC. < Ref. to LIST OF DIAGNOSTIC TROUBLE CODE (DTC) . >
scientia non olet · About Mike's Workshop Manuals