Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Subaru >> 2015 >> WRX Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 120 (Engine Lubrication System (H4DO)) >> Oil Level Switch >> Removal

Oil Level Switch: Removal

WARNING: This page is about a different car, the 2015 Subaru Outback and 2015 Subaru Legacy. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the ground terminal from battery sensor. <Ref. to BATTERY , NOTE, Repair Contents.>
  2. Remove the under cover. <Ref. to REMOVAL , Front Under Cover.>
  3. Drain the engine oil. <Ref. to REPLACEMENT , Engine Oil.>
  4. Disconnect the oil level switch connector from the engine harness, and remove the clip (A) securing the harness.
    Fig 1: Identifying Oil Level Switch Engine Harness
    G10263077Courtesy of SUBARU OF AMERICA, INC.
  5. Remove clip (A) from the oil pan upper, and remove the oil level switch.
    Fig 2: Locating Oil Level Switch Bolts
    G08580513Courtesy of SUBARU OF AMERICA, INC.
scientia non olet · About Mike's Workshop Manuals