Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Subaru >> 2015 >> Outback 2.5i >> Repair and Diagnosis >> Brakes >> Traction Control >> Vehicle Dynamics Control (VDC) System (Service Information) >> VDC Control Module and Hydraulic Control Unit (VDCCM&H/U) >> Maintenance Mode >> VDCCM Parameter Reading

VDCCM Parameter Reading

  1. Connect the Subaru Select Monitor.
  2. On «Main Menu» display, select «Each System Check».
  3. On «System Selection Menu» display, select «Brake Control System».
  4. On «Brake Control System» display, select «ABS/VDC System».
  5. When «VDC/parking brake» is displayed, select the [OK] button.
  6. On «Brake Control Diagnosis» display, select «Work Support».
  7. On «Work Support» display, select «Maintenance at the time of ECM replacement».
  8. Select «Reading of parameter: ECM to SSM».
  9. Save and close the file.
scientia non olet · About Mike's Workshop Manuals