Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Subaru >> 2015 >> Outback 2.5i >> Repair and Diagnosis >> Brakes >> Traction Control >> Vehicle Dynamics Control (VDC) System (Service Information) >> Front ABS Wheel Speed Sensor >> Inspection >> Check With SUBARU Select Monitor

Check With SUBARU Select Monitor

  1. Connect the Subaru Select Monitor to data link connector.
    1. Run the "PC application for Subaru Select Monitor".
    2. On «Main Menu» display, select «Each System Check».
    3. On «System Selection Menu» display, select «Brake Control System».
    4. When «ABS/VDC System» is displayed, select the [OK] button.
    5. From «Current Data Display & Save», select «FR Wheel Speed» and «FL Wheel Speed».
  2. Check if the speed indicated on the display changes in the same manner as the speedometer reading during acceleration/deceleration when the steering wheel is in the straight-ahead position.
  3. If the speed indicated on the display does not change in the inspection, check the ABS wheel speed sensor. <Ref. to CHECK ABS WHEEL SPEED SENSOR UNIT , INSPECTION, Front ABS Wheel Speed Sensor.>
scientia non olet · About Mike's Workshop Manuals