Manifold Absolute Pressure and Intake Air Temperature Sensor: Removal

Remove the clip (A), lift the front of the collector cover in the direction of arrow, and then remove the collector cover.

Fig 1: Removing Front Collector Cover
Courtesy of SUBARU OF AMERICA, INC.
Disconnect the ground cable from battery.
Disconnect the connector (A) from the manifold absolute pressure & intake air temperature sensor, and remove the manifold absolute pressure & intake air temperature sensor from the intake manifold.

Fig 2: Locating Intake Air Temperature Sensor Manifold Absolute Pressure Connector
Courtesy of SUBARU OF AMERICA, INC.