Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Subaru >> 2015 >> BRZ Limited, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 3 (Vehicle Stability Control System) >> Vehicle Stability Control System >> DTC U0073 CAN Failure. A System Bus Off Detection; DTC U0100 Engine Data, Not Received; DTC U0101 Transmission Data, Not Received; DTC U0126 Steering Angle Sensor Data, Not Received >> Inspection steps

Inspection steps

WARNING: This page is about a different car, the 2014 Subaru BRZ. However, it is still accessible from the selected car via links, so may be relevant.
  1. Diagnostic code list recheck
    1. Using SSM3, clear the diagnostic code. (Refer to CHECKING/CLEARING DIAGNOSTIC CODES  )
    2. Perform a driving test.
    3. Using SSM3 again, check the diagnostic code output. (Refer to CHECKING/CLEARING DIAGNOSTIC CODES  )
      RESULT

      Result Go to
      Error code A
      Normal B

      B: Malfunction reproduction test (Refer to PROCEDURES FOR MALFUNCTION PHENOMENON SIMULATION )

      A: To CAN communication system (How to troubleshoot) (Refer to HOW TO TROUBLESHOOT )

scientia non olet · About Mike's Workshop Manuals