Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Subaru >> 2014 >> Outback 3.6R Limited >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 18 (Speed Control System (H4DO)) >> Accelerator Pedal >> Removal

Accelerator Pedal: Removal

WARNING: This page is about a different variant/trim than selected.
  1. Disconnect the ground cable from battery.
    Fig 1: Disconnecting Ground Cable From Battery
    G08579605Courtesy of SUBARU OF AMERICA, INC.
  2. Disconnect the connector (A).
  3. Remove the nut (B) securing accelerator pedal assembly, and remove the accelerator pedal assembly.
    Fig 2: Identifying Connector And Nut Securing Accelerator Pedal Assembly
    G08582779Courtesy of SUBARU OF AMERICA, INC.
scientia non olet · About Mike's Workshop Manuals