Non-Turbo Model

WARNING: This page is about a different car, the 2014 Subaru Forester. However, it is still accessible from the selected car via links, so may be relevant.

Temporarily install the generator bracket to the engine and tighten the bolts in the numerical order.
Tightening torque: 36 N.m (3.7 kgf-m, 26.6 ft-lb)

Fig 1: Locating Engine Bolts Of Generator Bracket
Courtesy of SUBARU OF AMERICA, INC.
Install the generator cord stay to the generator bracket.
Tightening torque: 6.4 N.m (0.7 kgf-m, 4.7 ft-lb)

Fig 2: Locating Bolt Of Generator Cord Stay From Generator Bracket
Courtesy of SUBARU OF AMERICA, INC.
Install the V-belt tensioner to the generator bracket. < Ref. to V-BELT TENSIONER ASSY , INSTALLATION, V-belt. >
Temporarily install the generator bracket to the generator and tighten the bolts in the numerical order.
Tightening torque: 25 N.m (2.5 kgf-m, 18.4 ft-lb)

Fig 3: Locating Bolts Of Generator Bracket
Courtesy of SUBARU OF AMERICA, INC.
Connect the connector (A) and terminal (B) to the generator.
Tightening torque: 16 N.m (1.6 kgf-m, 11.8 ft-lb)

Fig 4: Identifying Generator Connector Terminal
Courtesy of SUBARU OF AMERICA, INC.
Install the V-belt cover bracket.
Tightening torque: 6.4 N.m (0.7 kgf-m, 4.7 ft-lb)

Fig 5: Locating V-Belt Cover Bracket Bolts
Courtesy of SUBARU OF AMERICA, INC.
Install the V-belts. < Ref. to V-BELT , INSTALLATION, V-belt. >
Connect the battery ground terminal.
Install the V-belt cover.
Tightening torque: 6.4 N.m (0.7 kgf-m, 4.7 ft-lb)

Fig 6: Locating V-Belt Cover Bolt
Courtesy of SUBARU OF AMERICA, INC.