Check Relay
WARNING: This page is about a different car, the 2014 Subaru Forester. However, it is still accessible from the selected car via links, so may be relevant.
- Check the resistance between relay terminals.
| Terminal No. |
Inspection conditions |
Standard |
Circuit |
| 1 - 2 |
Always |
1 MΩ or more |
 Courtesy of SUBARU OF AMERICA, INC.
|
| 1 - 4 |
Always |
Less than 1 Ω |
| 1 - 2 |
Apply battery voltage between terminals 3 and 5. |
Less than 1 Ω |
- Replace the relay if the inspection result is not within the standard value.