Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Subaru >> 2014 >> Outback 2.5i, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 35 (Power Assisted System Power Steering (Service Information)) >> Power Steering Control Module >> Removal

Power Steering Control Module: Removal

WARNING: This page is about a different car, the 2014 Subaru Forester. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the ground cable from battery.
  2. Remove the power steering control module.
    1. Disconnect the connector of the power steering control module.
    2. Remove the nuts, and remove the power steering control module.
      Fig 1: Locating Power Steering Control Module Nuts
      G08316091Courtesy of SUBARU OF AMERICA, INC.