Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Subaru >> 2014 >> Outback 2.5i, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 35 (Power Assisted System Power Steering (Service Information)) >> Power Steering Control Module >> Installation

Power Steering Control Module: Installation

WARNING: This page is about a different car, the 2014 Subaru Forester. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the power steering control module.

    Tightening torque: 

    7.5 N.m (0.76 kgf-m, 5.5 ft-lb) 

  2. Connect the harness connector.
    CAUTION: Make sure that the connector is securely locked.
  3. Attach the harness bracket.

    Tightening torque: 

    7.5 N.m (0.76 kgf-m, 5.5 ft-lb) 

scientia non olet · About Mike's Workshop Manuals