Inspection Of Switch Unit
WARNING: This page is about a different car, the 2014 Subaru Forester. However, it is still accessible from the selected car via links, so may be relevant.
- Operate the switches to check the continuity between terminals.
Courtesy of SUBARU OF AMERICA, INC.
Switch position Terminal No. Standard Front OFF A1 and A3 Less than 1 Ω INT A1 and A3 Less than 1 Ω LO A2 and A3 Less than 1 Ω HI A2 and A4 Less than 1 Ω Washer ON B2 and B3 Less than 1 Ω Rear OFF A5 and B2
B6 and B2
B7 and B21 MΩ or more LO B6 and B2 Less than 1 Ω HI B7 and B2 Less than 1 Ω Washer ON A5 and B2 Less than 1 Ω - Replace the switch if the inspection result is not within the standard.