Unit Inspection
WARNING: This page is about a different car, the 2014 Subaru Forester. However, it is still accessible from the selected car via links, so may be relevant.
Preparation tool:
Circuit tester
- Check the resistance between switch terminals.
| Terminal No. |
Inspection conditions |
Standard |
Connection diagram |
| 1 - 2 |
Switch OFF |
1 MΩ or more |
 Courtesy of SUBARU OF AMERICA, INC.
|
| Switch ON |
Less than 1 Ω |
- Replace the power rear gate inner switch, if the inspection result is not within the standard value.